Presentations + Speaking

2014

“Building Envelope Commissioning” presented by Jillian Burgess at GreenBuild, New Orleans, LA. October 2014

“Early Phase Energy Modeling to Right Size Your Envelope” presented by Jillian Burgess at BEST15, Kansas City, MO. April 2015

“Early Phase Energy Modeling to Right Size Your Envelope” presented by Jillian Burgess at ASHRAE IBPSA, Atlanta, GA. September 2014

“Triple Glazing Setting a New Standard in Energy Efficiency” presented by Jillian Burgess at Design on the Delaware, Philadelphia, PA. November 2014

A Case Study on the Chesapeake Bay Foundation Brock Environmental Center, presented by David Altenhofen along with partner Will Wright of Brooks and Wright Commissioning at at the CSI Philadelphia/Building Enclosure Council Philadelphia “Constructing Net Zero” Seminar, May 22, 2014.

"Designing High-performance Exterior Wall Systems and Building Performance Modeling" presented by Dave Altenhofen. May 16, 2014

“Introduction to Building Enclosure Commissioning”, presented by Rob Kistler at the 2014 ASHRAE Annual Conference, June 2014

"Designing High-performance Exterior Wall Systems and Building Performance Modeling", presented by David Altenhofen at 2014 PPSI Building Enclosure Series.

"Building Expectations and Beyond: Trends in High Performance Facade Design", presented by David Altenhofen at AIA DC, March 2014

"Designing High Performance Building Enclosures with Performance Modeling” presented by David Altenhofen during the 2014 PPSI Building Enclosure Series, AIA Philadelphia, April 2014

“Energy Upgrades for Existing Buildings” presented by David Altenhofen to the Princeton University Facilities Department Continuing Education Program, March 2014


2013

“Air Barriers and High Performance Buildings” presented by David Altenhofen at 2013 BEC Wisconsin Symposium, Half-day workshop. March 2014

“Energy Upgrades for Existing Buildings” presented by David Altenhofen at Princeton University Facilities Department. March 2014.

"Building Expectations and Beyond: Trends in High-Performance Facade Design” presented by David Altenhofen at AIA DC, March, 2014

“Utilizing a Modified AAMA 501.1-05 Dynamic Wind Generation to Simulate Wind Driven Rain in Windows, Curtain Walls, Architectural Metal Walls, Masonry, EIFS and Concrete Facades” presented by Jasha Kistler and Mike Williams at ASTM Symposium “Building Walls Subject to Water Intrusion and Accumulation: Lessons from the Past and Recommendations for the Future”. April 2013

"Building Expectations and Beyond: Trends in High-Performance Facade Design” presented by David Altenhofen at PPSI. April 2013

“Managing Construction Defects” presented by David Altenhofen at 2013 Annual Conference and Expo, CAI Pennsylvania and Delaware Valley Chapter. May, 2013

“High Performance Building Enclosures; Connecting Design, Building Science and Validated Delivery for Optimal Energy Savings and Durability” half-day workshop presented by David Altenhofen and Rob Kistler at 2013 AIA National Convention, Denver CO. June, 2013

“Water Testing Using PPV Fans to Simulate Wind-Driven Rain” presented by Jasha Kistler to the Portland BEC. June 2013


2012

“High Performance Building Enclosures: Connecting Design, Building Science and Validated Delivery for Optimal Energy Savings and Durability” presented by David Altenhofen at the AIA Philadelphia Design on the Delaware Conference. 2012

“Requirements for Exterior Wall Insulation, Air Barriers, Energy Savings and NFPA 285” presented by David Altenhofen at Pittsburgh Construction Specifications Institute. 2012

“Buildings Use Too Much Energy: The Solutions Symposium” presented by David Altenhofen at the Charleston BEC in South Carolina. 2012

“High Performance Building Enclosures: Connecting Design, Building Science and Validated Delivery for Optimal Energy Savings and Durability” presented by Rob Kistler and David Altenhofen at the National AIA Convention. 2012

“High Performance Building Enclosures; Connecting Design, Building Science and Validated Delivery for Optimal Energy Savings” presented by David Altenhofen at Buildings Use Too Much Energy, The Solutions Symposium, BEC Charlestown. Oct 2012

“High Performance Building Enclosures; Connecting Design, Building Science and Validated Delivery for Optimal Energy Savings and Durability” presented by David Altenhofen at AIA National Convention, Washington DC, Half-day workshop. May 2012

“Controlling Moisture and Air Flow” presented by David Altenhofen at PPSI Building Enclosure Series, Module #3. 2012

“Through the Building Enclosure” presented by David Altenhofen at AIA Philadelphia. May 2012

“Application of Delegated Design” Philadelphia CSI half day Symposium, Roundtable Panel Moderator David Altenhofen. May 2012

“Delegated Design, When and How to Include in your Project” presented by David Altenhofen at Philadelphia CSI, half day Symposium. May 2012

“Connecting Building Science to the Practice of Architecture” presented by David Altenhofen at the 2012 AIA National Convention, Washington DC. May, 2012

2012 Globalcom Conference and Expo: Atlantic City NJ, David Altenhofen conducted a half day seminar on Building Enclosure Commissioning for The Association of Energy Engineers. March 2012


2011

“Building Enclosure Commissioning” presented by David Altenhofen at National Capital Chapter of the Building Commissioning Association Seminar. November 2011

“Effective Quality Control and Quality Assurance” presented by David Altenhofen at Webcast for Lorman Education Services. October 2011

“Emerging Trends in Building Enclosure Design, Delivering High-Performance Buildings” presented by David Altenhofen at Webcast for Lorman Education Services. June 2011

“Emerging Trends in Building Enclosure Design” presented by David Altenhofen at PPSI Rainscreen Symposium and Tradeshow, Philadelphia PA. May 2011

“Okhta Center, a Case Study in Integrated Design” presented by David Altenhofen at Philadelphia AIA Suburban Procon. April 2011

“Okhta Center, a Case Study in Integrated Design” presented by David Altenhofen at Philadelphia Building Enclosure Council. Jan 2011

“Using Scientific and Analytical Tools To Make Decisions Regarding Fa├žades For Optimal Performance” presented by David Altenhofen at IQPC Facade Design and Delivery Conference, New York New York. Jan 2011